正丁醇对柴油机颗粒组分与形貌特征的影响

为探讨柴油机燃用正丁醇-柴油混合燃料降低颗粒排放的机理,采用热重分析仪与场发射扫描电子显微镜,重点对正丁醇-柴油混合燃料燃烧的颗粒形貌特征进行研究,分析了颗粒的组分、微观结构以及粒径分布随w(正丁醇)的变化规律. 结果表明:正丁醇-柴油混合燃料燃烧的颗粒呈团簇状结构,随着w(正丁醇)的增加,团聚程度逐渐提高,排列结构更加紧密;颗粒的粒径逐渐减小,柴油、B5、B10〔B5、B10是指w(正丁醇)分别为5%、10%的正丁醇-柴油混合燃料〕燃烧的颗粒平均粒径分别为1.43、0.85、0.52 μm;颗粒中的主要成分为碳烟,其质量分数约为60%,随着w(正丁醇)的增加,碳烟和可溶有机物组分的质量分数有所增加,硫酸盐、金属等不易挥发组分以及金属元素的质量分数逐渐减少. 研究显示,添加正丁醇,可促进颗粒转化、改善颗粒的氧化过程,使颗粒向小粒径方向移动;由于颗粒中可溶有机物组分含量增加,因此提高了颗粒在碰撞过程中凝并的概率,致使颗粒的团聚程度增加.      

非饱和带柴油入渗实验研究及HSSM模拟

通过土柱模拟实验研究了柴油在不同含水率、不同粒径砂土中的入渗及残留特征,并采用HSSM(Hydrocarbon Spill Screening Model)模拟了柴油在含水率为6%中砂介质中的入渗过程.结果表明:随着介质含水率增加,柴油在介质中湿润锋推进速度先增大后减小,最快速度对应含水率处于相应介质最大残余含水率40%~50%范围内,残余柴油量随介质含水率增大而减小.在细砂、中砂和粗砂3种介质,柴油入渗平均湿润锋推进速度分别为0.42,0.52,0.73cm/min;平均残余柴油量分别为98.10,68.70,48.79mL. 湿润锋推进速度及残余柴油量均与介质粒径呈负相关.HSSM拟合柴油在含水率为6%中砂介质中的湿润锋推进速度为0.5832cm/min,与实验值0.5689cm/min相比,相对误差为2.51%.HSSM能较好的模拟柴油在非饱和带入渗过程,对于土壤及地下水污染预报具有重要意义.     

FBC-DPF在柴油机颗粒物控制中的应用研究

目前针对加装FBC-DPF(燃油添加剂-柴油机颗粒捕集器)后的柴油机放特性研究较少,并且缺乏FBC-DPF对颗粒物中PAHs排放量的影响效果研究. 为全面评估加装FBC-DPF后柴油机颗粒物排放特性和FBC-DPF对柴油机尾气中的颗粒物排放污染控制效果,在发动机台架上对装有FBC-DPF的重型柴油机进行了颗粒物排放特性试验. 利用电子低压撞击仪(ELPI)测量加装FBC-DPF前、后柴油机颗粒物的数浓度与粒径分布,用玻璃纤维滤膜采集加装FBC-DPF前、后尾气中的固相PAHs,利用色谱质谱联用仪对加装FBC-DPF前、后尾气中的固相PAHs进行定量分析. 结果表明:①加装FBC-DPF后柴油机排放的颗粒物数浓度大幅降低,FBC-DPF对尾气中颗粒物的捕集效率平均值在95%左右;②加装FBC-DPF后柴油机固相PAHs总比排放量有所降低,在大负荷区域降幅在25.0%~88.0%之间;③加装FBC-DPF前的颗粒物中位直径为30~89nm,而加装FBC-DPF后的颗粒物中位直径为41~98nm,平均增幅为38.2%. 对于国Ⅳ及未来国Ⅴ柴油机排放法规,FBC-DPF是解决柴油机颗粒物排放的有效手段;此外,FBC-DPF可以大幅降低柴油机尾气中的有毒成分,并且能够适应高含硫量的燃油环境.      

Effects of a diesel oxidation catalyst on gaseous pollutants and fine particles from an engine operating on diesel and biodiesel

The effects of a diesel oxidation catalytic (DOC) converter on diesel engine emissions were investigated on a diesel bench at various loads for two steady-state speeds using diesel fuel and B20. The DOC was very effective in hydrocarbon (HC) and CO oxidation. Approximately 90%–95% reduction in CO and 36%–70% reduction in HC were realized using the DOC. Special attention was focused on the effects of the DOC on elemental carbon (EC) and organic carbon (OC) fractions in fine particles (PM_2.5) emitted from the diesel engine. The carbonaceous compositions of PM_2.5 were analyzed by the method of thermal/optical reflectance (TOR). The results showed that total carbon (TC), OC and EC emissions for PM_2.5 from diesel fuel were generally reduced by the DOC. For diesel fuel, TC emissions decreased 22%–32% after the DOC depending on operating modes. The decrease in TC was attributed to 35%–97% decrease in OC and 3%–65% decrease in EC emissions. At low load, a significant increase in the OC/EC ratio of PM_2.5 was observed after the DOC. The effect of the DOC on the carbonaceous compositions in PM_2.5 from B20 showed different trends compared to diesel fuel. At low load, a slight increase in EC emissions and a significant decrease in OC/EC ratio of PM_2.5 after DOC were observed for B20.     

DOC+CDPF对生物柴油燃烧颗粒排放特性的影响

以一台满足国五排放法规的车用柴油机为样机,研究加装氧化催化转化器DOC与催化型颗粒捕集器CDPF(DOC+CDPF后处理装置)前后,柴油机燃用B20燃料(燃料含20%体积掺混比的生物柴油)的颗粒排放特性.结果表明,在未加装该后处理装置时,该机排气颗粒数量浓度的粒径分布呈双峰形态,B20燃料的排气颗粒数量浓度的峰值粒径在10nm和50nm附近,纯柴油的排气颗粒数量浓度的峰值粒径在50nm和200nm附近.在颗粒粒径小于120nm的区域,该机燃用B20燃料的排气颗粒数量浓度大于纯柴油.加装该后处理装置后,该机排气颗粒数量浓度的粒径分布呈多峰形态,峰值粒径在10nm、20nm和60nm附近.加装DOC+CDPF后,不论是柴油还是B20燃料,与原机相比,柴油机排气颗粒总数量下降明显,其中60~200nm粒径范围的颗粒数量浓度降幅更为显著.在相同工况下,DOC+CDPF对柴油机燃用B20燃料的颗粒总数量净化效率高于纯柴油.     

Mutagenicity of diesel engine exhaust in the Ames / Salmonella assay using a direct exposure method

The aim of this study was to investigate the potential mutagenic activity of diesel engine exhaust in the Ames/Salmonella assay using a direct aerosol exposure system. So, TA 98 and TA 100 strains, with or without added S9 mix, were exposed to diesel emissions after varying degrees of filtration. Variants of these two strains, deficient in nitroreductase (TA 98NR and TA 100NR) or over-expressing O-Acetyl Transferase (YG 1024 and YG 1029), were also exposed to total (unfiltered) diesel exhaust to highlight the putative mutagenicity of any nitro-PAHs present in these emissions. Mutagenic activity of the diesel exhaust was demonstrated on Salmonella typhimurium, strains TA 100 and variants TA 100 NR and YG1029. The use of a particle filter did not modify the genotoxicity of the diesel emissions, indicating a major contribution of the gas phase to the mutagenicity of these diesel emissions. The prominent role of the particulate-associated nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) claimed by some authors working on diesel exhaust organic extracts was not confirmed by our results with native diesel exhaust exposure. Our results show that the gas phase is potentially more mutagenic than the particles alone.     

Assessment of hydrocarbon emissions from diesel invert mud residues treated in a bioreactor

Hydrocarbon emissions from a diesel invert mud residue (DIMR) were monitored while the hydrocarbons were being biodegraded in a solid‐phase bioreactor. Five to twenty percent of the reduction in diesel hydrocarbons was attributed to evaporation depending on the treatment, i.e. homogenization, cultivation, and aeration. Most of these volatile hydrocarbons were linear C₈ — C₁₂ alkanes and one‐ring aromatics. Of the treatments aeration had the largest effect on emissions; forced air through the bottom of the bioreactor cells increased emissions by three times over that of the non‐aerated cells. Cultivation increased hydrocarbon emission concentration as much as twofold over the pre‐cultivation value, however, emissions returned to the original levels within 12 hours. Homogenization had the least effect of all treatments. Diurnally, the emission rate was 40% higher in late afternoon than at midnight; the cause of which was probably atmospheric fluctuations such as temperature and solar radiation. The effects of daily atmospheric fluctuations were empirically modeled and taken into account for determining the total volume of emissions.     

Particulate and semivolatile associated aliphatic hydrocarbon exhaust emission from heavy duty diesel vehicles

The exhaust emissions from two heavy duty diesel vehicles running on eight different fuel compositions were investigated regarding their content of high molecular weight (≥ C₁₂) aliphatic/ olefinic hydrocarbons. It was concluded that the emitted amount of semi‐volatile associated aliphatic hydrocarbons (range C₁₂‐C₂₂) depend on the fuel used in the engines and that these emissions mainly consisted of uncombusted fuel components. It was also found that uncombusted engine lubrication oil was the main constituent of the emitted particulate associated aliphatic hydrocarbons (C₁₇‐C₄₀). These constituted between 58% and 95% of the total emissions of the high molecular weight aliphatic compounds. Emission factors for the total of high molecular aliphatic hydrocarbons (C₁₂‐C₄₀) were demonstrated to be in the range of 15–100 mg/km. Some individual aliphatic hydrocarbons with cocarcinogenic effects were identified and quantified in both particulate and semi‐volatile phases of the exhaust. Multivariate data analysis was used to investigate the relationship between fuel parameters and emission of semi‐volatile aliphatic emission.     

柴油车排气微粒后处理器的研究

通过同种典型微粒过滤器的比选试验,表明高效袋式消烟器微粒捕集效率最高.其结构简单,成本低,耐热性好,因此具有很好的推广价值.如果应用在公路隧道中,能降低隧道内能见度的影响,具有较大的开发前景.      

汽油机排气颗粒粒径分布特征试验研究

对汽油机排气中颗粒的数浓度和粒径分布特征进行了测试.在测试工况下,汽油机排气中的颗粒呈包含核模态粒子(10 nm＜DP＜50 nm)和积聚模态粒子(50 nm＜DP＜487 nm)的双峰分布,排气颗粒的总数和总质量浓度分别为4.2×105-7.9×106个·cm-3和0.02-0.27 mg·m-3.汽油机在开环控制状态下(车速不低于90 km·h-1时)的颗粒数量排放明显高于闭环控制状态(车速不高于70 km·h-1),总颗粒质量浓度随车速的增大显著增加.随车速增大,积聚模态粒子的平均粒径先减小后增大,核模态粒子的几何平均粒径先增大后减小,低车速时,有大量10-20 nm的核模态粒子生成.柴油机和汽油机排气颗粒中核模态粒子通常占有大的数量百分比,为75%-95%,而其质量百分比仅为5%-25%.汽油机的总颗粒、核模态粒子和积聚模态粒子的数量和质量排放均远低于柴油机.